Attention: Your browser is not supported.
Attention: Your browser is outdated, so this website may not display properly.

Roller brake testers RT2001 / RT2002

Single bed roller brake tester for passenger cars, vans and light commercial vehicles with a standard track of 2200mm and with 700mm rollers.


Simple but effective!


In addition to measure the brake forces per wheel and the difference between the left and right sides of an axle, the operator can determine the important quantities rolling resistance, actuation force, ovality (out-of-roundness) and brake fading for each wheel.

Special attention has been given to prevent damage to the tires. The rollers quickly stop when slippage occurs, even during the start-up of the motors. All roller brake testers are equipped with reliable worm gear motors.

The brake efficiencies (decelerations) of the vehicle are calculated automatically after manual vehicle weight input or by means of the (optional) weighing facility. These efficiencies can be compared with the legal requirements for the service- and parking brake.

RT200x
Advantages
  • High quality.
  • Reliable worm gear motors.
  • Hot dip zinc chassis.
  • Standard 4x4.
  • No damaged tires.
  • Extensive analysis.

Specifications

RT2001
Maximum axle load
3000 kg
Measuring range
6000 N
Motor(s)
2 x 2,2 kW
Roller speed
2,5 km/h
Roller dimensions
700 x 206 mm
RT2002
Maximum axle load
4000 kg
Measuring range
8000 N
Motor(s)
2 x 5,5 kW
Roller speed
5 km/h
Roller dimensions
700 x 206 mm
All models
Track
700-2200 mm
Dimensions
234 x 66 x 30 cm
Finish
Hot dip zinc
Power supply
3PH 400 V / 50 Hz

Options

  • Roller cover plates, non pivoting
  • Roller cover plates, pivoting
  • 4-point weighing system
  • Steel rollers
  • Easy Exit® lift system
  • Free run roller set

Impression

RT cover plate
Pivoting galvanised cover plates.
RT steel rollers
Steel rollers for tyres with spikes.
Free run roller set
Free run roller set.