The ESCON PD2600 Play Detector series is designed to check quickly and efficiently most steering and suspension components. It enables a technician quickly to detect play and wear in the wheel guiding and steering parts of passenger cars and light trucks. A used car often shows wear and tear in ball joints, bushings, fixations, pivot points, link bolts and shock absorber mountings. Most worn or damaged components can be identified before they pose problems.

The PD2600 model consists of a hydraulic power unit, a control lamp (cable connected or wireless) and two platforms, one for the left wheel and one for the right wheel. The platform height is only 60 mm. The flush mount model FM can be installed on both sides of an inspection pit or can be integrated in a suitable 4-post lift.

Each platform is actuated by two hydraulic cylinders. Four models are available: the PD2610 (cable torch), PD2615 (=PD2610 but with wireless RF torch) PD2620 (cable torch) and PD2630 (= PD2620 but with wireless RF torch). The model number determines the possible movements of the platforms as well as the type of control lamp supplied. No floor frames are required.

	Specifications: Operation: Electro-hydraulic Maximum axle/wheel load: 3 ton / 1,5 ton Operating pressure: 175 bar Horizontal force/plate: 8 kN Longitudinal/transversal movement: 50 mm Test speed: 60 mm/sec Cable length (PD2610/PD2620): 6,5 m Dimensions platform FM: 690 x 700 x 60 mm (LxWxH) Motor: 1,5 kW, 3PH+N+E 400V / 50Hz / 16A slow Motor: 1PH 230V / 50Hz available as an option. Model PD2610 / PD2615 Movements: Front, Rear, Left, Right, Diagonal Model PD2620 / PD2630 As PD2610 / PD2615 +: Automatic mode Anti-fase movements Independent movement left & right platform Brochures: PD2600 Hydraulic Play Detector